|
 |
ST70 Plus Series
- ST70 Plus Instrument
- 6.5” Ultra bright sunlight viewable display
- Superior visibility with high quality graphics and a wide viewing angle
- Night mode and inverse text mode for low light conditions
- Create a system with SeaTalkng sensors for wind, speed, depth and NMEA2000 compatible engine systems
- User defined instrument pages
- 25 screen layout options with analog, digital, and historical displays
- Configure as either an instrument or autopilot display
- ST70 Plus Instrument Keypad
- Controls all the instrument functions of the ST70 Plus multifunction display
- Multifunction 'Unicontrol' interface
- 6 push button controls (backlit)
- Keypad controls all instrument functions
- ST70 Plus Sail Keypad
- Designed for sail boats
- Push button controls (backlit)
- Keypad controls instrument and autopilot functions
- Track to waypoint
- Dodge maneuver
- Course adjustment and autotack functions
- ST70 Plus Power Keypad
- Designed specifically for powerboats
- Keypad controls instrument and autopilot functions
- Unicontrol' interface allows change of course
- 8 push button controls (backlit)
- Dodge function available with SPX pilots
|
 |
ST70 Series
- ST70 Multifunction Colour Instrument
- Fully customisable displays for depth, speed, wind, navigation data, engine data and more.
- Full colour graphical displays, virtual analog displays and histograms.
- Eight user defined instrument data pages.
- 16 screen layout options available for each data page.
- Each page can be customised and turned on/off as required.
- 11 languages available
- Sunlight viewable TFT colour display, 89mm (3.5") 320 x 240 pixel resolution (QVGA).
- Fully waterproof to CFR-46 standar
- Can easily be retrofitted to ST60 surface mount installations
- Compatible with SeaTalk, SeaTalk 2 , SeaTalk ng and NMEA 2000 devices
- ST70 Wind Transducer Pod
- SeaTalk NG compatible connections for use with ST70 instruments
- Hosts any Raymarine ST30, ST40, ST50, ST60, ST60+, ST80 or ST290 series wind transducer
- ST70 Speed Transducer Pod
- SeaTalk NG compatible connections for use with ST70 instruments
- Hosts any Raymarine ST30, ST40, ST50, ST60, ST60+, ST80 or ST290 series speed transducer
- ST70 Depth Transducer Pod
- SeaTalk NG compatible connections for use with ST70 instruments
- Hosts any Raymarine ST30, ST40, ST50, ST60, ST60+, ST80 or ST290 series depth transducer
|
|
ST290 Series
- ST290 Displays
- ST290 Graphic
- For control and display of every available information source
- ST290 Data
- The ideal repeater solution
- ST290 Analogue Wind & Close Hauled Wind
- ST290 Analogue Compass
- ST290 Rudder
- ST290 Keypads
- Pilot Keypad
- push-button ST290 Pilot Keypad with 1 degree and 10 degree course change buttons gives complete autopilot control
- Man Over Board (MOB) Keypad
- Activates Man Over Board function on Raymarine navigation aids
- Remote Keypad
- Gives complete remote control of ST290 Graphic and Data displays
- ST290 Transducers and DPU
- ST290 DPU
- Essential to every ST290 system
- Delivers advanced and rapid data calculations and serves as an easy connection point for SeaTalk, SeaTalk2, NMEA 0183, NMEA 2000 and DC power
- ST290 Wind Trandsducer
- ST290 Depth Pod
- ST290 Speed Pod
|
|
      
|
ST60 Plus Series
- ST60 Plus Depth
- Maximum and minimum depth display
- Depth trend indicator
- Extra-large digits with high contrast and wide viewing angle
- Transducer, keel or waterline offset
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders
- ST60 Plus Graphic
- The ultimate repeater display for your onboard system
- Monitor all SeaTalk navigation data from a single display
- Displays depth, speed, wind, GPS, navigation data, environmental data and more
- Choose between single and multi-line numeric readouts as well as histograms and graphs
- Dot matrix LCD display with wide viewing angle and sharp contrast
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders
- ST60 Plus Speed
- Current, maximum and average speed displays
- Speed performance from 0 to 60 knots
- Speed Over Ground (SOG) display (when interfaced with SeaTalk compatible GPS)
- Velocity Made Good display (when interfaced with SeaTalk compatible wind instrument.)
- User selectable 'Pop Up Pilot' display reports changes to connected SeaTalk autopilot mode or course settings
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders
- Compatible with the wireless SmartController autopilot control and instrument repeater
- ST60 Plus Tridata
- Provides accurate depth, speed, trip and timer information
- 3-line display with high contrast and wide viewing angle
- Current, maximum and average speed display
- Temperature range from -10°C to +40°C
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinder
- Compatible with the wireless SmartController autopilot control and instrument repeater
- ST60 Plus Rudder
- Colour-coded, easy to read analog readout.
- Backlit keypad and dial with three levels of illumination.
- Real-time, accurate readout from -40º to +40º Degrees
- May be configured as a Master for vessels without an autopilot system installed, or configured as a SeaTalk rudder angle repeater from Raymarine autopilot systems
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders
- Compatible with the wireless SmartController autopilot control and instrument repeater
- ST60 Plus Compass
- Current, locked and average heading displays
- Magnetic or true hading readout
- Course Over Ground (COG) display when connected to SeaTalk GPS source
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinder
- Compatible with the wireless SmartController autopilot control and instrument repeater
- ST60 Plus Wind
- True and Apparent wind direction and speed (SeaTalk speed data required for true calculations)
- Velocity Made Good calculation (when SeaTalk speed data is present)
- Tack Angle Display (when SeaTalk speed and heading data is present)
- Beaufort wind speed display
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinder
- Compatible with the wireless SmartController autopilot control and instrument repeater
|
 |
ST40 Series
- ST40 Depth
- SeaTalk compatible for networking to other instruments, multifunction displays and autopilots
- high contrast LCD display for excellent visibility
- shallow, deep and anchor alarms
- keel or waterline offsets tailor ST40 depth to your boat's characteristics
- feet, fathoms or meters display
- ST40 Speed
- SeaTalk compatible for networking to other instruments, multifunction displays and autopilots
- high contrast LCD display for excellent visibility
- readout in knots, kilometers per hour or miles per hour
- water temperature readout in degrees Celsius or Fahrenheit
- ST40 Bidata (Depth & Speed)
- SeaTalk compatible for networking to other instruments, multifunction displays and autopilots
- high contrast LCD display for excellent visibility
- shallow, deep and anchor alarms
- speed readout in knots, kilometers per hour or miles per hou
- water temperature readout in degrees Celsius or Fahrenheit
- ST40 Wind
- SeaTalk compatible for networking to other instruments, multifunction displays and autopilots
- high contrast LCD display for excellent visibility
- apparent wind speed and direction readout
- true wind speed and direction readout (when connected to SeaTalk compatible speed instrument)
- manual or autopilot initiated locked heading mode
- ST40 Compass
- SeaTalk compatible for networking to other instruments, multifunction displays and autopilots
- high contrast LCD display for excellent visibility
- true or magnetic bearing information
- integrated direction to steer and course deviation indicators
- user or autopilot initiated locked bearing mode
|
| Official Raymarine site for Instruments |
|
